Pathio Users

Incomplete print (logo model)

  • Prusa mk3
  • Beta 6 & Slicer 1.43.2
  • PLA

Full reset after Beta 6 install

When printing the Pathio logo I noticed quality issues with:

  • infill overlap
  • base layer fill
  • top layer infill not full
  • Model did not print completely.

Top rounded corner is missing a section on all layes on inside and outside perimeter. I printed the same model in Slicer and it did print the complete model.

Photos are marked

20190222_173153 20190222_173202 20190222_173318 20190222_181404 20190222_181434

I have gcode, just can’t upload

Hi Jimmy,

We are having some problems with the top layers, which probably applies to the bottom layers as well.

I’ve promoted you, so you should be able to upload files now. Could you zip up all your config files? You can do that by going to debug -> open config directory and copying those files.

Looking forward to hearing from you!

Daniel

Also shell on this print were at default of 4 tracks, but only printed 2 shells.

Configuration files - Beta 6.zip (4.8 KB)

gcode file - pathio_logo-beta6.zip (82.0 KB)

Version: 0.5.2 - beta0

Its been a while and thought I would look at latest beta. Print looks great other that the gap it is still doing.

Should I reset something with the new beta and test again?
20190404_190259%5B1%5D

Hi Jimmy,

I’m sorry for not getting back to you last time.

I think the gap you’re seeing is the z seam. We are having continuing problems with this, and we will have some fixes hopefully coming soon!

Do let us know if you have any other feedback or suggestions!

Daniel